Micro-Clean

Micro-Clean Cleanroom

The Micro-Clean cleanroom is specifically designed to meet requirements of the medical and pharmaceutical industries. Micro-Clean's design allows it to be used as either a totally freestanding room or it can be used in combination with your existing walls and ceiling. The Micro-Clean comes completely factory prefabricated for minimal on-site erection time and is totally self-contained with all components factory finished. (Average installation time is 1 1/2 to 2 days from start to certification.)

The Micro-Clean and its components have the ability to be changed in size and cleanliness levels on-site and are almost 100% reusable. So, if the need arises, you can take the room (and the investment) with you. The Micro-Clean's design emphasizes microbial contamination and particle infiltration reduction. We accomplished this with an innovative sealing system. The vinyl is attached to the wall frame by way of the 3M Dual-Lock fasteners assuring you of a pressure-tight seal. Each intersection of wall panels is sealed on the outside with a customer approved caulking (optional).

The Micro-Clean can accommodate either fan-powered HEPA filters or ducted 2x4 HEPAs (99.99% on .3 microns). Wall-mounted HEPAs can be attached to the wall panels when existing height is limited. Rooms with the side-mounted option have been tested and passed cleanliness levels of CL 1000 and better. Airflow patterns and dead air spots are controlled by way of wall-mounted gravity louvers. These louvers also act as back-draft dampers and automatically close down, thereby reducing the chance of infiltration from either fan or power failure.

The Micro-Clean addresses the need to remove particles from the air, it also has options that reduce or eliminate the chance of contamination from being introduced inside the room. Pass-thru allows small products to be easily passed in and out of the room without any personnel having to enter or exit the room. The addition of a gowning room or wall(s) will protect your process from outside contamination as you enter or exit. The Micro-Clean is one of the only cleanrooms that offers a scrub panel. This panel is manufactured out of the same materials as a standard panel, except we replace the vinyl panel with a 3/4" particle board that is covered on both sides with white Formica. This panel allows the addition of sinks, soap dispensers, and/or hand dryers.

The Micro-Clean is a semi-rigid, modular, softwall cleanroom designed around the concerns found in the medical industries for microbial contaminants as well as the more stringent airborne particulate requirements found in the Micro-Electronics, Aerospace and Hi-Tech Markets. The Micro-Clean has been specifically designed to meet and exceed the standards required in the IV, Home infusion and Compounding pharmacy markets. Rooms have been installed in Pharmacies, Hospitals and in Hi-Tech companies all over the North and Central America and in Europe.

Ask about our new AL series that will be manufactured out of aluminum with either Plexiglas or Safety Glass.

Back

More